| Ladder (Z) Level-eze Leveler w/Swivel Fe | |
![]() |
Reduces the possibility of your ladder shifting unexpectedly by providing a stable, level base. Allows you to keep both hands on the ladder and both feet on the ground when you set your ladder. No latches or foot adjustments to throw you off balance just when you need balance the most.
Aircraft quality aluminum is used for the housing and other aluminum parts. All steel parts are zinc plated and dichromate dipped. Locks when you set your ladder down and unlocks when the ladder is picked up. Can be installed on any aluminum or fiberglass extension ladder. |
|
|
|
| Ladder Bonnet | |
![]() |
Washable, soft fleece like material snaps on over Vee-Groove ladder tops and protects against scratching and scuffing. |
|
|
|
| Ladder Cap | |
![]() |
Rugged, waterproof, polyurethane cover for the top of your Vee-grooved ladder headpiece. Prevents scratching or other damage. Comes complete with velcro strap for easy installation. |
|
|
|
| Ladder Caps (2) | |
![]() |
Helps stabilize your ladder while protecting support surfaces from being scratched or marred. Made of a pliable rubber that expands to fit most extension ladder rails up to 3-3/16 x 1-3/16” |
|
|
|
| Ladder Lanyard | |
![]() |
This accessory enables you to safely clean windows from a ladder by freeing your hands. The lanyard wraps around a ladder rung and through the D-ring, hanging down from a ladder rung. |
|
|
|
| Ladder Leveler Cleated Feet (2) Xtenda-L | |
![]() |
Level a ladder in seconds with unlimited adjustment positions. You can easliy extend and retract it by simply squeezing the spring loaded locking plates with your thumb and your four fingers on the lower bracket. This leveler with cleated fleet is designed for greater safety when using ladders on soft surfaces such as gravel, grass, mud.
Xtenda-Leg™ levels type II, I & 1A ladders up to 32ft work length.
|
|
|
|
| Ladder Leveler w/Rub Feet (2) Xtenda-Leg | |
![]() |
Level a ladder in seconds with unlimited adjustment positions. You can easliy extend and retract it by simply squeezing the spring loaded locking plates with your thumb and your four fingers on the lower bracket. This leveler is designed for flat surfaces.
Xtenda-Leg™ levels type II, I & 1A ladders up to 32ft work length.
|
|
|
|
| Ladder Levelers LeveLok | |
![]() |
Mounts easily to all ladders with three bolts, replaces existing feet with heavy duty swiveling steel feet with rubber pads, extends simply by pressing on lower foot pedal, and releases easily, simply press the release lever which causes the leg to draw back up. Made from aircraft grade aluminum. |
|
|
|
| Ladder Levelers Quick Conn Base Unit | |
![]() |
Set of 2 Quick Connect Base Units for Quick Connect Levelers ONLY (one for left rail, one for right rail). Includes installation instructions and all mounting hardware.
For complete unit, please look at item code: 73-23 |
|
|
|
| Ladder Levelers Quick Conn.Complete Leve | |
![]() |
This Single Leveler kit enables you to snap it into a Base Unit on either side of your ladder. A special shoe design provides gripping teeth on both sides, always ready to take a "Pit Bull" bite into ice, snow and gravel surfaces. Snap it on, and you've got an adjustable ladder leg.
Complete Kit: Quick Connect Leveler (Includes 1 Leveler (LL-STB-1QC), 2 Base Units, hardware and instructions) |
|
|
|
| Ladder Levelers Quick Connect LeveLok | |
![]() |
Quick Connect Single Leveler only For use only with LevelLok Quick Connect Base Units, which are not included in this item For complete unit, please look at item code: 73-23 |
|
|
|
| Ladder Mitts | |
![]() |
Rugged orange urethane Ladder Mitts fit over the tops of both wood and aluminum ladders. (sold in pairs) |
|
|
|
| Ladder Pro Ladder Levelers | |
![]() |
Ladder Pro Leveler utilizes a spring loaded locking device within the extension leg guides. The extension is released by simply pushing down on the triple lock rings so leg slides to achieve a leveled ladder base. Will support loads equivalent to full rated capacity of the ladder. Added safety of ball socket patented swivel feet with rubber pads that give the ladder base a firm grip on sloped surfaces. Ideal for using on extension or straight ladders on uneven surfaces. Attaches easily to Type IAA, IA, I, and II fiberglass and aluminum extension or single ladders. |
|
|
|
| Ladder Quick Click | |
![]() |
Fast and easy to use. Slides on and off without any tools. Spring loaded locking latch makes it easier and quicker to install/remove. Mar-resistant rubber end caps protect work surface. Span: 46”, Standoff : 10” Weighs only 5 lbs. |
|
|
|
| Ladder Quick Click End Caps (2) | |
![]() |
Replacement Rubber End Caps (Pair) for Quick-Click Standoff. |
|
|
|
| Ladder Quk Conn Shoulder Rest w/base Lev | |
![]() |
Simply mount a QC Base Unit near your ladder's balance point, then snap our QC Shoulder Rest in place. This incredibly comfortable pad makes it easy to "shoulder" and carry a ladder with a minimum of body strain.
Quick Connect Shoulder Rest with Base
|
|
|
|
| Ladder Safety Shoes Rubber (Pair) | |
![]() |
Make wooden or sectional ladders safer with these easy to apply shoes. |
|
|
|
| Ladder StandOff | |
![]() |
Two width modes (wide and deep) provide great options for a wide variety of uses. Wide mode covers from 4-6 feet. Deep mode keeps ladder from 12-28 inches from the wall.
Features: |
|
|
|
| Ladder StandOff Fleece Pads (2) | |
![]() |
Replacement Fleece Bonnets (Pair) for Ladder StandOff |
|
|
|
| Ladder StandOff Hardware Kit | |
![]() |
Replaces all your StadOff Hardware. |
|
|
|
| Ladder StandOff Rubber Pads (2) | |
![]() |
Replacement Rubber Pads (Pair) for Ladder StandOff |
|
|
|
| Ladder, Long Bonnet | |
![]() |
Washable, soft fleece like material snaps on over Vee-Groove ladder tops and protects against scratching and scuffing. |
|
|
|
| Leveler Repl Cleated Feet (2) Xtenda-Leg | |
![]() |
Kit Includes:
2-Cleated Feet,
2-Metal Lock Caps,
6-screws
|
|
|
|
| Leveler Repl Rub Feet (2) Xtenda-Leg | |
![]() |
Kit Includes:
2-Rubber Feet,
2-Metal Lock Caps,
6-screws
|
|
|
|



