METAL & PAINT GRAFFITI REMOVER

Metal & Paint Graffiti Remover is a fast acting, biodegradable liquid graffiti remover for exterior and interior signs. Metal & Paint Graffiti Remover safely penetrates and loosens the graffiti on signage and makes it easy to remove.

Metal & Paint Graffiti Remover can be used to remove graffiti on metal signage, traffic signage, rail signage, and any metal signage with a reflective surface.

(Note: Use caution when using Metal & Paint Graffiti Remover on reflective surfaces as the Metal & Paint Graffiti Remover may dull the surface.)

Exterior and Interior Graffiti Removal Process:

Safety Instructions - When starting a graffiti removal job always wear safety protection before handling any of the graffiti removing products. Safety goggles and chemical resistant gloves are required before using Metal & Paint Graffiti Remover. Wearing long sleeves and long pants are recommended to protect the skin. Always have access to water when working with Metal & Paint Graffiti Remover. If Metal & Paint Graffiti Remover does get on your skin, wash the skin with water to remove the product.

Before using Metal & Paint Graffiti Remover check the surface to see how clean it is. The surface does not have to be perfectly clean to start, but if the surface has substantial dirt on it, the dirt may impede the penetration process and should be washed off before removing the graffiti.

(Note: Always test product on a small hidden area prior to full application.)

Equipment Needed for Removal of Graffiti:

1. Metal & Paint Graffiti Remover
2. Safety equipment (goggles, chemical resistant gloves, etc.)
3. Bucket of water
4. Rags
5. Sponge, Sprayer or scouring pad

Application Method:

1. Put your chemical resistant gloves and goggles on
2. Wash down the surface with water using a rag
3. Shake the product to activate it
4. Pour needed amount of product on another rag, sponge, or scourer pad
5. Dab the product liberally on the graffiti
6. Let the product activate on the surface for 30 seconds
7. Agitate surface with a rag, sponge, or scouring pad
8. Wash off with water using a new rag
9. Repeat steps if graffiti is still showing

At the end of the job, wash down all safety equipment and tools used in the removal process to get all of the Metal & Paint Graffiti Remover off for reuse on the next job.

Results and Benefits:

The main differences between Metal & Paint Graffiti Remover and other graffiti removal methods include: dramatically reducing the time it takes to remove the graffiti, one application effectiveness in removing 99% of the typical graffiti and no damage to the original underlying surface! Metal & Paint Graffiti Remover gets all of the graffiti off the surface within minutes while other products can take multiple applications and hours of time. Metal & Paint Graffiti Remover enables removal in minutes on all typical signage which saves our customers significant time and labor. With less time and labor spent on each individual graffiti removal job, our customers can get 2, 3 even 4 times as many graffiti removal jobs accomplished per shift. Plus, you will not be spending labor or purchasing new signage to replace the old sign that has graffiti on it anymore, nor repairing or replacing surface damage from inappropriate graffiti removal products.