Water Pump Kit 12v for Spraying, Water Fed or Solar Panel cleaning
Quick Overview
- This Kit is ready to be asembled and put to use via a connection to Garden Hose fittings or 1/2in NPT Female connections
- Capable of continuous operation and runs most efficiently at 45 to 60 psi pressure, Able to run Dry
- Chemical Resistant Components Rated for SH
- The Pressure switch s intgrated into the Pump Head and is adjustable for pressure
- Typically Flows at 2.5 to 3.0 Gallons per minute and Transfer 50 Gallons in 17 Minutes or less
Show More
Water Pump Kit 12v for Spraying, Water Fed or Solar Panel cleaning
Water Fed Pole, Solar Brush or Chem-Wash Delivery Pump Kit with the Plumbing
Water Pump Kit 12v 90psi Pump
Pump Kit Water or Chemical Transfer Pump 110v rated at 2.5gpm continous at 40psi
Transfer Pump for Water, SH (Sodium Hypochlorite, Bleach), Detergent Mixes, Non Flammable Fluids
Used Transfer chemicals from One Tank to another Tank
Features
- 1/2 in. slide ports
- Capable of running dry
- Demand pump @ 90psi Max
- Pressure is adjustable at the Switch on the top of the pump
- 110v permanent magnet motor weather sealed pump
- Totally enclosed non-venting
- Thermally protected
- 2ea Slide Fittings to 1/2in Tube
- 4 Feet of Polyethylene Tubing
- 2ea Tube to 1/2in npt Male adaptors
- 1ea 1/2in to Garden Hose Male Fitting
- 1ea 1/2in to Garden Hose Female Fitting
Typically runs at 40 to 45 psi Delivering 2.5 to 3 gallons per miute delivered to the pole/sprayer
Flow
at |
PSI |
|||||
|
20
psi |
40
psi |
60
psi |
80
psi |
90
psi |
|
GPM |
4.5 |
3.8 |
3.2 |
2.5 |
1.9 |
|
In Gallons Per Minute |
||||||
Capable of Running Dry for short periods
Self Priming to 10ft
Demand Style Pump @ Max 90psi
12v Permanent Magnet Motor Pump
Thermally Protected
Fittings as described are included


This pump is meant to be used at medium (40 to 70psi) pressures for things like Spraying water, SH and can transfer Chemical Batches from one tank to another.
Useful for:
- Loading RO or purified Water into a Delivery Tank on a Vehicle
- Loading SH (Bleach) from an on property storage tank to the Tank on a Service Vehicle
- Loading a Premixed or Mixing a Batch of Chemical mix onto a service vehicle from multipe on site Tanks.
Flow
at |
PSI |
|||||
|
20
psi |
40
psi |
60
psi |
80
psi |
90
psi |
|
GPM |
4.5 |
3.8 |
3.2 |
2.5 |
1.9 |
|
Gallons Per Minute |
||||||
Thermally protected motor, at a typical flow rate of 3 Gallons per minute will run continuously
Run a two Pump setup to get flow similar to Taps in structures. (4 gpm to 4.5 gpm at 55psi)



Slide Port Fittings allow for easy Pump removal, This could be to bring it in out of the weather or to allow for movement of the pump from on Tank Station to another Station or if the pump needs to be replaced for other reasons.