Winsol Awning Clean & Protect Vinyl

This was designed for light to moderately soiled vinyl fabrics.

Helps reduce color loss and fading while reintroducing lost plasticizer and UV protection
This maintains vinyl suppleness and increases its effective life span.
One gallon covers 10,000 sq. ft.
Gallon size.

Cleaner and Protectant is our one-step maintenance system for light to moderately soiled vinyl fabric.

The Cleaner and Protectant cleaning system saves time and money when used as part of a regular vinyl maintenance schedule! This solution cleans, restores shine, provides UV protection and reintroduces lost plasticizer in a vinyl awning.

?Cleaner and Protectant is used and approved by vinyl manufacturers and will not void the manufacturer's warranty!

Using the WINSOL maintenance system with an awning maintenance pole:

Insert pick-up tube into Awing Cleaner and Protectant container. Turn water valve to the “on” position and adjust the metering valve to optimum cleaning level (refer to manufacturer’s recommendations to start). Clean each awning from the bottom to the top for best results and to prevent streaking. Turn metering valve off and use the clear water to rinse. Always rinse immediately to avoid streaking.

Cleaning coverage is about 5,000 to 7,000 square feet per gallon.

Hand Cleaning:

Mix 8 ounces of Awning Cleaner and Protectant into 1 gallon of water. Using a brush of medium stiffness or an awning sponge, gently but firmly scrub awning from bottom to top. Rinse immediately with clear water.

?Cleaning coverage is about 5,000 to 7,000 square feet per gallon.

*For neglected or damaged awnings, use WINSOL’s Deep Clean and Awning Armor to restore appearance. For regular maintenance, use the Awning Cleaner and Protectant