0
 Welcome to J. Racenstein Company, LLC  (800) 221-3748  |   Help Center  |  Catalogs  |  About Us

Building Wash 3 (1 gal)

Item #: 320-650

$32.00

Quick Overview

Versatile one step building cleaner designed to remove surface dirt and paint oxidation from painted and nonpainted surfaces without brushing when used with pressure washing equipment.


Show More
This is an obsolete Item
 
 

Versatile one step building cleaner designed to remove surface dirt and paint oxidation from painted and nonpainted surfaces without brushing when used with pressure washing equipment.

• Versatile — Cleans brick, metal, plastics and painted aluminum siding.

• Works with pressure washers, steam cleaners or hand washing.

• Works in hot or cold water.

• Biodegradable — No phosphates or caustics.

• Contains no acid.

• Will not etch glass.

1. To avoid streaking, always pre-wet surface to be cleaned.

2. Spray or brush

Building Wash 3 onto surface. (May be used up to 1:10 dilution for light cleaning or use with brush.)

3. All surfaces should be thoroughly rinsed with clean water.

Note:

for most painted surfaces, use Building Wash 3 with hot water and at least 500 psi pressure.

For best results on a vertical surface, apply

Building Wash 3 from bottom up. Pressure rinse from bottom up. Conclude with a final rinse from top down.