Cleansol BC Siding/Gutter cleaner 5Gal

Cleansol BC is a different concept in house washing.

It is meant for Painted surfaces and vinyl, your gutters, vinyl siding, and painted aluminum siding will look as good after washing as they did when new.

The surfaces will also be protected from environmental damage and will clean more easily next cleaning.

• Cleansol BC will remove stains from gutters,
• Provide great deck cleaning results with super fast rinsing and spot free drying.
• Cleansol BC is completely safe on paint, glass, and plants.
• It will remove virtually any dirt, soil, or stain that is on a painted surface.
• Cleansol BC is biodegradable and very safe for people even though it is a powerful cleaner. 
• Deep cleans virtually all surfaces including painted metal, EIFS, vinyl, awnings, roofs, porous concrete, fiberglass, siding, and wood. -Neutralizer of choice for acids used in high ris

Advantages:

• Brushless and Powerful Cleaner
• Fast Rinsing
• Safe to use on Painted Surfaces and Glass.
• Spot Free Drying 
• Biodegradable
• Protects from environmental damage
• Can dry on surface.

Limitations:

• Does not remove deep black staining, Britenol would be the product to use.
• The product works equally well hot or cold but should not exceed 120 degrees Fahrenheit.
• Polished aluminum could be whitened or browned by the soap. In this situation, Britenol can be used safely.
• For really deep black staining use Britenol.

• Do not use on polished aluminum
  

Technical Data

• Appearance & Odor: Amber color, mild citrus odor.
• Physical State: Liquid.
• pH: 13.5
• Vapor Pressure (mmHg): As water
• Vapor Density (air=1): As water
• Boiling Point: 212° F
• Freezing/Melting Point: N.A.
• Specific Gravity (water =1): 1.09
• Evaporation Rate: As water
• Solubility in Water: Complete

Pre-Testing 

Always test prior to beginning full-scale cleaning operations. Testing should confirm cleaning effectiveness on each type of surface and stain designated to be cleaned. 

Test also to determine the desired surface contact time and any potential for adverse reactions with adjacent materials. Allow test panels to dry thoroughly before evaluating final appearance and results. 

Dilution Rate

First cut at 4:1 to make product ready to use then follow the dilution range listed below. 

• One way is to add 1 Gallon of Cleansol BC to a 5 Gallon Pail and then add 4 gallons of water

Apply using a pressure washer downstreaming, X-Jet or a low pressure spray applicator. 

• 10:1 for difficult cleaning 
• 20:1 for light soil and brushing 
• 1:1 for gutters and down spouts (Not Further Diluted) 

Note: Dilutions will vary based on the severity of the stain and type of surface.