0
 Welcome to J. Racenstein Company, LLC  (800) 221-3748  |   Help Center  |  Catalogs  |  About Us
  • Micro Jet Rinse Bar Low Pressure 14in
  • Micro Jet Rinse Bar Low Pressure 14in Image 1
  • Micro Jet Rinse Bar Low Pressure 14in Image 2
  • Micro Jet Rinse Bar Low Pressure 14in Image 3
  • Micro Jet Rinse Bar Low Pressure 14in Image 4
  • Micro Jet Rinse Bar Low Pressure 14in Image 5
  • Micro Jet Rinse Bar Low Pressure 14in Image 6

Videos

Gardiner Pole Systems

Micro Jet Rinse Bar Low Pressure 14in

Quick Overview

  • Over the brush rinse bars offer quick rinsing, best used when rundown from the frames or seals are not an issue, you can plumb to choose th erinse bar or jet capsules
  • Rinse bars need more water flow than pencil jets, 0.8 Gallons per minute, this extra flow can help rinse the glass faster
  • 1/4 in John Guest connections built in, use the gardiner Tee or Quad Tee for using two Pencils and the Rinsebar simultaneously (1.3 gallon per minute flow)
  • 32 MicroJets on the rinsebar create a curtain of rinse water just above the brush.

Show More
Item #: 157-40473

$29.05

$31.05

This is an obsolete Item
 
 
 In Stock & Ready to Ship

Micro Jet Rinse Bar Low Pressure 14in

  • 32 micro jets provide precise but gentle rinsing with brush on the glass
  • Fits between brush and brush socket on any 14 inch (35 cm) Gardiner brush
  • Provides over-bristle micro jet rinsing
  • Needs a higher flow rate than standard pencil or Fanjets - recommended 0.8 gallons per minute
  • Height of jets can be adjusted
  • Can be used with internal brush jets as well
  • Lightweight at 48g
  • Uses John Guest connections on unit
  • Uses standard Brush T Connector and jet hose - optional extra

Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm)

Screw Choice:

  1. If using on Ultimate, Super-Lite & Universal brushes then the standard 16mm screws will need replacing with 19mm screws
  2. If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws
Please note that if using on a 35cm Universal Sill brush the rinse bar will sit slightly higher than standard on the brush

Please note: The rinse bar does not come with the brush & gooseneck pictured

Dual Pencil Jets with Rinse Bar installed


Rinse Bar in Action with Pencil Jets at about 1.3 gallons per minute

Rinse Bars need more water than Pencil Jets

Rinse Bar installed on Gardiner Brush