StonePro Pro Marble/Tile Grout Sealer

Quick Overview

Great water and oil repellent for use on marble, granite, limestone, travertine and grout
Great penetration for polished marble, travertine, and terrazzo surfaces
Provides long-lasting protection
V.O.C. compliant
Coverage 800 - 1,000 sq. ft. per gallon Coverage vares based on the density & texture of the surface

Item #: 81-18M

$28.15 - $105.35

Size Selection

Size:

2 options available.

Pro Sealer
Impregnating Sealer

A unique solvent-based, V.O.C. compliant impregnator sealer which penetrates grout, stone and masonry surfaces to protect against water and oil staining while allowing substrate to properly breath. Non-yellowing and long lasting. Will not change surface appearance.

ADVANTAGES:

Non-Toxic solvent-based Hybrid Carrier Technology
Quick and easy to apply - fast cure time
Non-Flammable
Safe for food preparation surfaces
Advanced Fluoropolymer Technology
VOC Compliant World-Wide
Protects against oil and water borne stains
Contains NO Prop. 65 cancer causing chemicals
Leaves no greasy film or residue
Will not change color or appearance of the treated surface
Provides long-lasting protection

HYBRID CARRIER TECHNOLOGY

An all-purpose solvent-based impregnating sealer for use on MARBLE, GRANITE,

TRAVERTINE, LIMESTONE & GROUT.

Pro Sealer provides excellent protection against waterborne and oil-based stains.

Pro Sealer falls well below the VOC limits of every district, city, county, state and country. With this unique solvent technology and provides the same penetration and protection of those with excessive levels of VOCs without the smell, hazard or liability and it is available in quantities that match the size of any job..

Application Instructions:

1) Make sure surface is clean, dry, free of debris, waxes and/or coatings.

2) Liberally apply an even coat to the surface. Sealer should be spread evenly over surface to ensure proper

penetration.

3) Allow sealer to penetrate the surface for 3-5 minutes. Surface should remain wet for a minimum of 3 minutes.

4) After 3 minutes, examine the surface and reapply where surface no longer appears wet on the surface.

5) After 5 minutes, wipe the surface dry and remove all excess sealer residue using a dry microfiber cloth. 6) Surface is suitable for use after 20 minutes.

Achieves a full cure and repellency in 72

Innovative Hybrid Carrier Technology yields a unique solvent-based sealer that offers the highest level of protection and is V.O.C. compliant world-wide.

Architects, Spec Writers, Contractors and Property Owners alike are all looking for the same thing, a sealer that will provide the best protection and safe to use. They find that solution with StonePro.