EaCo Chem OneRestore Restoration Cleaner - Detergent

Quick Overview

OneRestore is a breakthrough detergent that provides remarkable versatility,
Cleaning power and safety all in one product. It is capable of removing the deepest water hardness and pollution stains
It is an effective coating remover and safely cleans glass and anodized aluminum when used as directed.

Item #: 86-62M

Size Selection

2 options available.

OneRestore® provides remarkable versatility, cleaning power, and safety all in one. It is appropriate for single or multiple surface restoration. OneRestore® is capable of removing the deepest stains. OneRestore® can also be used to safely remove deposits on glass and anodized aluminum. OneRestore® is a great choice for cleaning and restoring college campuses; government facilities, hospitals, and office buildings.

OneRestore is a breakthrough detergent that provides remarkable versatility, cleaning power and safety all in one product. It is capable of removing the deepest water hardness and pollution stains, and mineral and metal oxide stains from a wide variety of surfaces. It is an effective coating remover and safely cleans glass and anodized aluminum when used as directed.

Hydrochloric Acid based: Make sure you wear gloves with any type of harsher acid.

OneRestore won't damage or change the color of any of the substrates it is used on. It will save hours of cleaning time versus the traditional bucket and brush method.

Anodized Aluminum Frame Restoration: OneRestore is an excellent product to restore the window frames. Spraying the chemical on the window frame will help keep it from getting on the window panes themselves. Scrub in the chemical with a steel wool pad, rinse, and dry. Note: If spraying harsh chemicals, beware of hazardous inhalation hazards.

Learning About Restoreing Anondized Aluminum Frames

After using One Restore on the frames you may want to renew the frames to a Satin Luster consider using A.R.T (Anodized Restoration Treatment) to treat the surface.

Glass Restoration, Sometimes, this chemical is best sprayed onto the glass. When you spray on the chemical, it helps to keep the chemical in a concentrated area when working. This is a smart technique when working on hot conditions. You do not want to have these harsher chemicals dry on the substrate. Note: if used in this manner, beware of hazardous inhalation hazards.

One Retore can be diluted in order to use a less intense dilution and work your way up stronger if needed. Suggested to dilute 1:1 and increase the amount of One Restore if necessary.

Glass Restoration Methods:

One method is to pour some into a bucket

use a strip washer (10 or 14inch).

wet the strip washer with the solution and rub onto a section to be restored.

Test a small area first.

DWELL TIME is important, for OneResore to work it takes 4 to 6 minutes to perform the desire restoration.

Also, NEVER, Never let OneResore dry on the surface as Very bad, hard to restore, drippy, swirl marks will be left behind, often uglier than the original stains and difficult to remove.

Keep the surface wet and all will be well, this is generally an easy thing to do on a compatible underlying surface. Always test a small area.

Once comfortable with the process wet an area as large as you can keep wet for that 4 to 6 minute dwell.

On windows out for the wind and sun that could be 10 4ftx6ft panes.

When in the sun, pre-wet the surface with water, helps to cool down the surface. work in much smaller areas

Every now and then...

Rinse the washer wand in clear water, squeeze out the excess water, then re-soak in the solution.

Mix Ratio: Pre-wet glass for at least 15 seconds with water. Start with dilution of 1 Gallon of OneRestore to 1 Gallon of Water (1:1) and work your way up to a 100% application as necessary. Do not apply to hot surfaces or surfaces in direct sunlight. Apply using a low-pressure, low-flow applicator such as trigger sprayer, pump up sprayers or T-Bar and mop method. Be careful not to drip on surfaces not intended to be cleaned. Apply an even amount on the surface from the top down. Allow to dwell on the surface, water rinsing before it dries. Must be clean water rinsed before wiping or squeegee swiping. Rinse any excess OneRestore from adjacent surfaces before it dries and to prevent clean streaking.

Link to:

WEATHER ADVISORY