Videos
EnviroBioCleaner Restorer - EBC Restoration Cleaner
Item #: 83-82M
$39.00 - $161.00
Size Selection
2 options available.
EBC Restorer is a revolutionary new product that replaces traditional hazardous acid cleaners.
EBC Restorer formula works with excellent health and safety benefits, replacing hydrochloric, citrus, glycolic, phosphoric, nitric, and other DOT hazardous acids. Composed of low pH organic salt combined with a special blend of cleaning agents, this product performs superbly in many cleaning and restoration projects.
Removes:
- Tire Marks
- Rust Stains
- Efflorescence
- Mineral Deposit
- Soot and fire burnout
- Fire retardant
- Concrete Brightening
FOR ALL TYPES OF SURFACES:
- Concrete
- Decorative Concrete
- Pavers
- Tub & Tile
- Grout
- Urinals
- Toilets
- Showers
- Concrete Truck/ Equipment
- Trucks/Vehicles
- Kennels
- Steam Tables
- A/C Coils
- Stainless Steel
- Food Oil/Grease Areas & more!
HEAVY OIL/GREASE SPOTS ON CONCRETE
Pretreat with EBC Multipurpose Cleaner/Degreaser or degreaser of your choice.
EnviroBioCleaner Restorer can be applied around oil/ grease areas to allow maximum penetration and dwell time for the oil lifting process without 2-stepping the cleaning area.
Do NOT introduce or add Sodium Hypochlorite (BLEACH) to the process.
LIGHT & SURFACE RUST REMOVAL
Apply up to a dilution of 1:1 of EnviroBio- Cleaner Restorer with water. Apply directly to the surface. Pre-wet area first for rust removal application due to ratio strength. The product will dissolve the rust slowly. For the vertical surface, rust will dissolve the rust from top-down without corrosive fumes. Agitation may be required for heavy stains. Rinse area with a pressure washer.
MIX RATIOS For heavy cleaning/restoration 1:5 For moderate cleaning/restoration 1:10 For light cleaning/restoration 1:20
LIGHT TO MEDIUM TIRE MARKS ON CONCRETE OR SIMILAR SURFACES
Apply a dilution of 10:1 – 15:1 with water of EnvirBioCleaner Restorer directly onto the surface and immediately clean/rinse off with a pressure washer wand or surface cleaner. Do dwell time as required.
HEAVY TIRE MARKS ON CONCRETE OR SIMILAR SURFACES
Apply a dilution of 5:1 – 8:1 with water of EBC Restorer directly on the surface and immediately clean/rinse off with pressure washer wand or surface cleaner. Repeat process if deep tire burns are still evident.
