Gardiner QuicK-LoQ Gooseneck Valve
Gardiner Gooseneck Valve with 'Aquatap Technology' inside...
Control is not letting go
Gardiner Gooseneck Valve with 'Aquatap Technology' inside
Maintain full 'two-hand' control of the pole whilst controlling the water flow
Simple and fast twist to actuate action - Twist on at the top LH corner of the window and Twist off on the bottom RH corner
Improves speed of water control compared to a manual valve
Also available as a cost option on our pole assemblies
Quick-LoQ brush connection
The following regular maintenance schedule for this item is recommended:
Every 2 months:
- Carefully remove the two allen key screws, remove the small springs from below and the two ball-bearings.
- Pull the two plastic parts apart and check for dirt and swarf build-up - clean out if needed
- Re-lubricate the twin O rings with silicone or lithium lubricant and re-assemble.
The above steps can also be carried out if the item starts to gets harder in use to operate than desired.