ProTool Comet P36 Skid Sprayer P-36 Pump
Quick Overview
- This P36 Sprayer is well regarded as a High Volume Low Pressure Gas Sprayer.
- Designed to spray harsh chemicals from a tank the pump system is able to withstand SH as well as pesticides.
- Also used to pump water to be distributed to other areas of a large cleaning task, like a solar farm
- A positive displacement pump that has a return line plumbed back to the tank, the pressure/flow regulator manages the pump output for control of the water/surfactant/pesticide flow
- It is a tank draw pump that delivers 6.5 GPM through a 1/2in hose to your trigger gun at up to 125psi.
Show More
$2,296.45
$2,659.05
Comet Skid Sprayer P-36
The Comet P36 pump system is a water moving marvel.
It is a tank draw pump that delivers 6.5 GPM through a 1/2in hose to your trigger gun at up to 125psi.
This sprayer offers a tough triple diaphragm pump with a pressure regulator, gearbox and Honda 6.5 GX engine.
Bleach capable it resists the effects of sodium hypochlorite and easy easy to rebuild.
Used to pump water from a tank to multiple pressure washers and as a Softwashing Spray Pump for Roof, Structure fence and deck SH mix cleaning.
Softwashing is a niche market that is high demand in many areas of the country many contractors prefer a high flow specialized pumping system that allows them to use a soft pressure wash technique that pumps from a chemical tank.
The Comet Kid Sprayer is bleach resistant, high volume and low pressure to avoid damaging the underlying surface.
This is a positive displacement pump and needs a return line plumbed back to the tank, the pressure/flow regulator, included, manages the pump output for precision control of the water/surfactant flow
This unit comes stock with a slotted unloader which bypasses 3 GPM of the 9 GPM pump capacity back into the tank
Specifications
Pump | Comet |
Manufacturer's Warranty | 1 year Limited Warranty |
Ship Weight | 44.0 lbs |
Power Supply | Gas engine Honda |
Flow (GPM) | Total Flow 9.6 (6.5 in Softwash Configuration) |
Pressure (PSI) | 0–150 |
Speed (RPM) | 3,600 |
Lift (ft.) | 9 |
Self-Priming | Yes |
Dimensions L x W x H (in.) | 25 x 16 x 16 |
Mounting Base L x W (in.) | 20 x 9 1/2 |
Temperature Capacity (°F) | 140 |
Inlet Port (in.) | 1 |
Outlet Port (in.) | 3/4 |
Seal Type | Diaphragm |
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.
The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust. For more information visit www.p65warnings.ca.gov/
