Surface Cleaners

The Hammerhead Surface Cleaner from PressurePro is an 18in Cleaning Path for 4 to 8gpm Pressure Washers and supports 1000 to 4000psi. It has a max 8gpm and 180 degrees, It includes 2 qty 25 Degree Tips at 02 Size 1/4npt and has ABS Housing with Brush Style Skirt

Vacuum Surface Cleaner 21in SS Controls overspray from pressure washing sidewalks, warehouse floors, tile surfaces and more. It Sanitizes with up to 230 degree F water and Floors and cleaned surfaces dry in minutes. Add filtration for Re-Use and have the ultimate in water conservation. Closed Loop Cleaning Systems are revolutionary in enviro-compliance and time savings.

Then we Whisper Wash 28in Big Guy 2 is perfect for Driveways, Parking Lots, Sidewalks, Pool and Patio Decks, Service Stations, Warehouse Floors, Loading Docks, School Yards, Public Facilities, Marina Docks, Restaurants, Stadiums, Tile Roofs, Tennis Courts, And Lots More!!

Vacuum Surface Cleaner 30in SS controls overspray from pressure washing sidewalks, warehouse floors, tile surfaces and more. Sanitizes with up to 230 degree F water and floors and cleaned surfaces dry in minutes. Add filtration for Re-Use and have the ultimate in water conservation. Closed Loop Cleaning Systems are revolutionary in enviro-compliance and time savings

We also accessories like Swivel GP Rotary Head w/Grease Fitting for 18in & 20in which is a complete NEW STYLE swivel assembly is for both 18 inch and 20 inch General Pump Hammerhead Surface Cleaners. This Swivel includes Grease fitting for the inner bearings includes the grease (Zerk) fitting. New, improved Swivel. Rated PSI: 4000 Max. Temperature: 180 Degrees Fahrenheit Swivel for the DCFSCP18GZ, 20GZ, and the 24GZ Surface Cleaners

Hammerhead Swivel Rotary Head Repair Kit has General Pump 2100372 New Grease Fitting Major Repair Kit. Hammerhead rebuild kit for new style GP Swivels that have a Grease Fitting. It’s a repair Kit For 2103220 and 2103226 Swivels in 18in and 20in Hammerhead Surface Cleaners.

Spray Bar 2 tip for Whipser Wash-WW-300 is used for Whisper Wash Classic Surface Cleaner. Balanced Spray Bar Assembly For Classic & Ultra Clean 19 inch Whisper Wash Surface Cleaners. It comes with 2 MEG2502 nozzles Length of bar is 18 inch. Do not use this spray bar with the Ultra Clean 16 inch Surface Cleaner. It also comes with 2 MEG2502 nozzles.

Recovery Surface Cleaner 21in Mosmatic can be connected to a Recovery Vacuum to the this surface cleaner and clean with expert

results like never before. This Mossmatic recovery surface cleaner will recover dirt and grime from most any cleaning job. Ideal for indoor and/or outside cleaning.

Nozzle Stainless Steel 1/8 npt has 3.5 Nozzle SS 1/8in 15deg. Typically used in the end of the rotating bars for pressure washer surface cleaners as shown on the right. The bars usually have 25 degree tips installed, for stronger, deeper, but slower cleaning 15 degree tips can be used.

Ball Valve Stainless Steel 3/8in 5000psi from Protool has stainless Steel Ball Valve for Pressure Washing rated at 5000 psi for 12 GPM flow and at 80psi 5gpm flow. Used to control the water flow water and allow switching of the tools at the end of the hose without turning off the pressure washer. This Shut Off Ball Valve is commonly used to switch between the Wand and a Surface Cleaner. Stainless Steel 304 Construction with 3/8in inlet and outlets, 5000psi rating. It can be Panel Mounted for control at the Rig

Ball Valve 7350psi Delrin Seal Viton is a quarter turn type valve and uses a solid,perforated pivoting ball to control the flow of most liquids including oil water or fuel through it. Ball valve is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The valve's handle will lie flat and in one with the flow when open and is perpendicular at 90 to it when closed.