Welcome to J. Racenstein Company, LLC  (201) 809-7500  |   Help Center  |  Catalogs  |  About Us
  • Gardiner Pole Extensions Modular Pole Extender

Videos

Gardiner Pole Systems

Gardiner Pole Extensions Modular Pole Extender

Quick Overview

  • Standard Modular Extension #10 - Can be fitted onto a Super Max 50 or onto the SLX 39 & Super Max 45 with an Extension #9 fitted
  • Standard Modular Extension #10 - Can be fitted onto an Xtreme 44 and Xtreme 47
  • Full Carbon Fibre Extension Section - Featuring the Gardiner Smart Clamps
  • We recommend that no more than 4 of these are used with an Xtreme 47 pole
  • Extra Working Reach: 5.25ft - Comes with #9 end cap fitted

Show More
Item #: 155-40M

$133.00 - $395.65

Size Selection

 
 
2 options available.
This is an obsolete Item

Gardiner Pole Extensions Modular Pole Extender

  • Standard Modular Extension #10 can be fitted onto a Super Max 50 or onto the SLX 39 & Super Max 45 with an Extension #9 fitted
  • Standard Modular Extension #10 can be fitted onto an Xtreme 44 and Xtreme 47
  • We recommend that no more than 4 of these are used with an Xtreme 47 pole
  • If wanting to use 4 extensions on an Xtreme 47 then all extensions would need switching to the High-Strength versions
  • Do not use 3 of these on an Xtreme 47 pole with the High-Strength versions added to the bottom
  • Please note that they may not be fully telescopic if using with a 3K 9 section pole
  • Section Material - Full Carbon Fibre
  • Clamp Material - Dupont-Zytel® thermoplastic reinforced nylon
  • Matt finish section surface
  • UK, US, European & Chinese Utility Patents

Please note that when fitting to a 9 section telescopic pole this section will not fully close up on the pole due to the stepped base part. This also means that the #10 clamp will not meet up with the base of the #9 clamp.

Full Carbon Fibre Extension Section - Featuring the Gardiner Smart Clamps

  • Extension Length = 1.80m
  • Weight = 510g
  • Handle Diameter = 49mm

Comes with End Cap fitted
Suitable for the SLX, Super Max & Xtreme pole ranges.

Electrical Hazard

Water-Fed poles should not be used near electricals wires, this would include the wires that connect a structure to the grid as well as the electrical grid wires themselves,

Gardiner Pole Systems builds protection into their poles.

All of the handle sections and extension sections of Gardiner’s poles are insulated against electrical current.

Gardiner Pole Systems do not recommend the operator removes the handle sections off their poles in an effort to make a smaller pole as this pole would not have the protection of the insulated base. The CLX range which is insulated throughout.

Maintaining good electrical isolation is a hallmark of the engineering that goes into the Gardiner Pole Systems line of water-fed poles and a high priority from Alex Gardiner personally to offer quality protection to the operator. This is why every handle section is insulated with a complete layer of insulating material.

Gardiner has electrically tested their poles to be able to isolate a minimum of 5000V.