Pole 40ft Monster II MicroFit Sorbo
Quick Overview
- The new Sörbo 40 foot Monster II Micro Fit pole is manufactured in 7 sections
- This is not a water fed pole. Each connection joint is Micro Fitted. Once you put them together they are tight fitted making the 40ft Monster II pole the most rigid on the market
- Assembling sections 1-2-3 and 6 will give you a 17 to 22 foot pole (also, try more combinations)
Show More
Sorbo Monster II Pole
Light aluminum poles screw together for an unbelievable 40-foot reach. Due to the time necessary to change out accessories, two poles are recommended working side-by-side.
One of the most rigid poles on the market. Instead of the usual traditional Christmas Tree design, this pole is made of three middle sections (where it bends most) out of the largest diameter tubing.
The top and bottom sections are tapered down. The lower two sections have cast aluminum telescopic locks so the poles can be quickly shortened or extended by 6 ft. The middle sections can be added or removed with screws and wing nuts, therefore the pole can be adjusted to any height.
Its standard cone tip accepts all squeegees and T-barsNOTE – Each connection joint is Micro Fitted. Be careful not to damage rim of pole ends. Once you put them together they are tight fitted making the 40’ Monster II pole the most rigid on the market.
Pole Depiction
Sections precision ends with Microfit joinery offering a stiff and easy to use pole
