Filter Housing for 4.5x20 with Clear Sump
- Full Flow Housing accepts 4.5in x 20in Cartridge
- Clear Sump Housing Pressure rated to 90PSI
- Housing includes Cap, Sump, Seal Ring and Wrench
- Heavy Duty Construction for long service life
- 1 inch FNPT Inlet and Outlet
Spare Part for:
Housing for 4.5x20 Filter Cartridge Insert - Typically DI Resin
The 1 inch port allows a greater volume of liquid to pass through the cap and the the built-in pressure release button in the cap allows for easier loosening the clear sump when it's time to replace the filter. This 4.5x20 Filter Housing accommodates a wide variety of 20-inch x 4.5-inch filters of your choice.
When use for Water Purification (vs filtering) this 4 x 20in Size is preferred for holding DI Resin inside of an internal 20in Cartridge (not included).
- Clear Plastic Sump
- 1 inch MNPT Inlet and Outlet for High Flow
- Max Rating 90PSI, suggested operating pressure 70PSI
- Wrench for Removing and tightening the Sump
- Leakproof sealing with provided seal
- Pressure relief valve to ease sump removal
- Heavy Duty Construction for Long Service Life
- Well Suited for Commercial, Industrial or Residential water filter applications.
This extra large housing allows for greater cartridge capacity, thus reducing the number of housings required to obtain a high-flow rate. The reinforced housing has excellent strength and are ideal for many residential, commercial and industrial applications.
4x20, 4.5x20, 4 1/2 x 20, 4-1/2x20, 4 1/2x20, 4 1/2in x 20in 4.5inx20in, 4.5 in x 20 in
Insure Seal is seated in housing top
Clear Housing Sump
Example of a Cartridge installation where granular media often DI Resin is placed into an insert cartridge and slipped into the Filter housing (Cartridge not included) 4x20